• Maximum lamps per transformer = 3

• For use with or without rail.

• Cable can be hidden above a suspended ceiling.

• For use with 1.5mm Cable Systems or 6mm Rod Systems.

• Maximum of 60 watts on any one cable or rod.

All electrics should be professionally installed.  Ensure the installer has valid certification.

For one 1.5mm Cable system you would need.

2 x cables (C1100 or C1102)

1 x lamp (8120A, 8120D or 8120N)

2 x C1705 connectors

1 x Transformer (Trans105)

Cabling

For the next 2 systems in close proximity, no further transformers are required.

Application: Window Displays, internal Displays.

Safety Notice: The cable display systems are discreet.  Where possible the cables should be recessed to avoid tripping hazards.  In all installations the fixing points should be checked to ensure that tension can be applied.  Although the display cables have a tensile strength of over 300 kilogram's, the fixing points may not have.  All electrics should be professionally installed.